Description
Positioned under an extrusion blow molding machine, EMI's two level, Blow Molding, Conveyor-Separator separates bottles and scrap as they fall from the press.
Specifications:
- Available in 12" belt width and lengths from 6'-15', in one foot increments
- Heavy-duty, 12-gauge steel construction
- Adjustable gap galvanized steel driven rollers for bottle conveying and scrap separating
- V-guided, FDA approved, white PVC belt, lapped under side rails, for tail and moil conveying
- 7" high 60° stainless steel adjustable width, side rails for orienting bottles onto rollers
- Leg sets with castors included. Specify belt heights
- 15' power cord included. Pre-wired, ready-to-run
- Control wiring contained in liquid-tight conduit and connectors
- 110/60/1 DC, 0-80 FPM, variable speed drive
- Units up to 10' length ship fully assembled
Available Options:
- Heat Shrinkable Tubing installed on Separation Rollers to provide improved traction
- Urethane Coated Rollers to minimize bounce
- Reversing DC Drive
- Bull Gear Drive, to create the same direction of travel for bottles and scrap
- Extension of Roller Section
- Shortening of Roller Section
How does it work?
- Parts, tails, and moils fall onto the upper, roller conveyor.
- As they are moved along by the rollers, the tails and moils fall through the cracks between the rollers onto a lower level, belt conveyor.
- The lower conveyor moves them in the opposite direction, out of the system.
EMI Part/Runner Separators mechanically separate sub-gated parts (not attached to a runner) and are not intended to be used to break parts away from a runner.
Each separator is intended to be used in conjunction with or attached to an EMI belt conveyor. A typical application places the belt conveyor under the press and mold to catch the shot, then move the parts and runners out of the press and separate them into two different containers or onto additional conveyors.
