The ECON pyrolysis furnace was developed for environmentally friendly and gentle cleaning of extrusion and filter parts. Thermoplastics and mixed plastics are removed under vacuum without any cleansing agent at a variable working temperature. Sensitive parts are protected due to the precise setting of the temperature. Your advantage: fast, cost-effective, and residue-free cleaning for an extended lifetime.
After opening the furnace lid the working chamber is charged from above. Dies and screen parts can be placed on the freely accessible drip grate or placed in baskets in preparation for the cleaning.
After the start of the cleaning cycle, the temperature in the working chamber is raised gradually and the vacuum pump evacuates the air. Once the necessary working temperature 1 has been reached, the polymer residues run into a collecting trough beneath the unit. Once the working temperature 2 has been reached, the incineration (pyrolysis = decompensation without oxygen) of the residues occurs on the parts to be cleaned.
The gases produced during the process are collected and cleaned by a specially developed "absorber" allowing the exhaust air to be discharged directly to the environment.
On completion of the process cycle, the cleaning process is terminated automatically. The cooled steel parts are cleaned of any residue by means of compressed air without impairing the structure of the material. The controlled temperature progress during the cleaning process prevents warping and loss of strength in the cleaned parts. The use fo an oil-lubricated vacuum pump minimizes running costs as no water treatment (cleaning) is required.
On request, we will be happy to arrange a visit to one of our customers. Additionally, a test run with your material in ECON's technical center is possible.
