Adjustable Angle | Models ADK & DDK

Description

An adjustable angle of 20°–45°, makes this Adjustable Angle conveyor perfect for under the press, alongside the press, or for moving parts to a trunkline, workstation, or automatic box filling system. Horizontal to inclined transition rollers eliminate pinch points and assure smooth part transfer. Angles and leg sets are easy to adjust.

Lengths: 5' to 15'
Belt Widths: 6", 9", 12", 18", 24", 30"

Standard Models (6", 9", 12", 18" widths) The “A” dimension infeed length minimum is 2.5'. The “B” dimension discharge length minimum is 2.5'. A + B can not exceed 15'. The motor is located at the discharge.
24" & 30" wide Models The “A” dimension infeed length minimum is 2.5'. The “B” dimension discharge length minimum is 2.5'. A + B can not exceed 15'. The motor is located at the infeed.

Specifications:

• Angle adjustment 20° to 45°
• Direct Drive configuration with 1/3 hp AC motor (110V input with 230/60/3 output to motor)
• 4-40 FPM variable speed drive
• No roller chain or sprockets
• Sealed gear reducer
• Available with Aluminum or Steel Frame
• 50 lbs. maximum load
• 1/8" anodized aluminum sheet
• Double V-guided, FDA-approved, white PVC belt with 1.5" flexible cleats on 18" centers
• 4" high side rails, lapped over conveyor belt
• Leg sets and swivel castors included
• 15' power cord included. Pre-wired ready to run (except polyphase systems which require some customer wiring)
• Control wiring contained in liquid-tight conduit and connectors
• All units ship fully assembled

Downloads

out900795 conveyor-leg-location-chart (5) conveyor-horsepower-determination-chart (5)

Request A Quote