EMI Part/Runner Separators are often a versatile and cost-effective way to separate parts from runners. Normally positioned at the end of an under-press conveyor, these Separators are available as either free-standing or conveyor-mounted units. Part-runner separation can be added to the end of either an under-press, Flat Belt Conveyor or to Cleated Belt, Inclined Conveyors of 12" or 18" widths. Note: Retro-fitting requires that EMI be supplied with the model and serial numbers of the existing conveyor. Pictured on this page, is a Free Standing Part Separator. This features a 16-gauge, adjustable height, support stand. Belt width is 18" and the belt speed is 40 FPM. They are shipped completely assembled—simply position the legs and they're ready to run. The pins on EMI Finger Separators can be pulled out and reconfigured to suit varying application needs. Many molders also choose to order additional belts that have been specifically configured to suit that application's specific needs.
EMI Part/Runner Separators mechanically separate sub-gated parts (not attached to a runner) and are not intended to be used to break parts away from a runner.
Each separator is intended to be used in conjunction with or attached to an EMI belt conveyor. A typical application places the belt conveyor under the press and mold to catch the shot, then move the parts and runners out of the press and separate them into two different containers or onto additional conveyors.
Flat-Belt Separators: Available on Models: ADF, DDF, RM & CLR with 12" and 18" belt width. Click here for Specifications.
Inclined-Belt Separators: Available on conveyor Models: ADC, DDC, ADK, DDK, KK, KKI, CAR, RCRD, RM2D, & RMC with 12" and 18" belt width. Click here for Specifications.
How to Order:
Specify one of the following options for your belt conveyor/separator combination:
